Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - sanju4883

Pages: [1] 2
1
Hacking and Security / Backtrack Wifi Problem
« on: June 20, 2012, 01:14:12 pm »
Hello, I am using Backtrack on Virtual Box on Ubuntu. in backtrack only LAN (eth0) connection shows.. there is no wireless connection (Wlan0)... in ubuntu i cant work on both connection.. can u tell me how to change setting for enable wifi in Backtrack...

i have test my connection in Terminal using "ifconfig" command..

2
Hacking and Security / Re: Backtrack Wifi Cracking Problem
« on: June 08, 2012, 05:00:26 am »
Quote from: palipr on May 27, 2012, 06:46:19 am

I would use 'airmon-ng start wlan0 TC'
I don't think that setting the channel in airodump-ng will keep the interface from channel hopping
Does airodump-ng confirm that it has detected a WPA handshake? I ask because for me airodump-ng would say that everything was captured correctly. But when attempting to crack pyrit was coming back saying that the capture file did not include a complete handshake. Drove me crazy until I found a patch for it. To make sure everything was working correctly I used a spare laptop to manually connect to my own WAP to ensure I had a valid handshake, once I made that work I moved on.


SO on which TC (Channel) i should set mon0, only the target channel or any other else?

3
Hacking and Security / Re: Backtrack Wifi Cracking Problem
« on: June 08, 2012, 04:59:05 am »
Quote from: palipr on June 05, 2012, 04:14:53 am

I've been really busy for a bit, you still interested in the term session? I don't have it saved or anything like that but I will do it again if you want


ok thanks..

4
Hacking and Security / Re: Backtrack Wifi Cracking Problem
« on: May 28, 2012, 04:50:37 am »
Quote from: techb on May 27, 2012, 06:16:42 am
Shouldn't mon0 be the wlan0?


means i  turn my wlan0 into monitor mode.. and this same is happen in Gerix wifi cracking tools in Backtrack 5

5
Hacking and Security / Re: Backtrack Wifi Cracking Problem
« on: May 28, 2012, 04:49:01 am »
Quote from: palipr on May 27, 2012, 06:46:19 am

I would use 'airmon-ng start wlan0 TC'
I don't think that setting the channel in airodump-ng will keep the interface from channel hopping
Does airodump-ng confirm that it has detected a WPA handshake? I ask because for me airodump-ng would say that everything was captured correctly. But when attempting to crack pyrit was coming back saying that the capture file did not include a complete handshake. Drove me crazy until I found a patch for it. To make sure everything was working correctly I used a spare laptop to manually connect to my own WAP to ensure I had a valid handshake, once I made that work I moved on.


================================
thanks dude.. i am getting little bit you.. can u share terminal CODE here..  means by TC.. should i get type the Target channel.. so i think i have to first scan it.....???

6
Hacking and Security / Re: Backtrack Wifi Cracking Problem
« on: May 27, 2012, 05:51:36 am »
Quote from: palipr on May 26, 2012, 08:12:31 pm
Make sure you set the channel on the monitor interface. If not the channel hopping can cause you to lose parts of the handshake.


Make sure airodump-ng is capturing all packets not just ivs


To find a hidden ssid deauth a client associated with the AP. Not sure how to discover without an associated client.


edit: what are you using to crack the handshake?


------------------


The following command i am using to crack WPA...
(((TB = target BSSID, TC = Target channel, CM = station))))



airmon-ng
airmon-ng start wlan0
airodump-ng mon0
airodump-ng -w wep --bssid TB -c TC mon0
aireplay-ng --deauth 1 -a TB -c CM mon0


etc.......

7
Hacking and Security / Backtrack Wifi Cracking Problem
« on: May 26, 2012, 06:20:24 pm »
While Cracking WPA or WPA2 password of wifi on backtrack, then  WPA Handshake could not be done or establish.. any Help please... !!!

I have also getting problem og <Hidden> Essid... help me please..

8
Hardware / Re: Wifi Antenna
« on: May 16, 2012, 04:48:13 am »
Quote from: Kulverstukas on May 15, 2012, 05:17:31 pm
I think the dude wants to plug his antenna straight to the USB, lol.
You need a dongle bro, one that is for wifi?


yes bro.. u r right.. but i have seen some antenna which are USB and without any type of circuit in that... but i think its ok... no problem.. thanks for help me...

9
Hardware / Re: Wifi Antenna
« on: May 15, 2012, 05:03:32 pm »
Quote from: techb on May 15, 2012, 09:29:28 am

I have absolutely no idea since there aren't any schematics for your build or the wifi adapter your trying to do this with,


If you reverse polarity's on things you have a sever chance of bricking things.


ok...  let me see on another way...

i have create a little fan few years ago.. see the following.

http://www.youtube.com/watch?v=UnLSULlZ8ys

10
Hardware / Re: Wifi Antenna
« on: May 15, 2012, 05:02:49 pm »
Quote from: F1.z3ro on May 15, 2012, 02:54:49 pm
Hope this helps:  http://pinouts.ru/Slots/USB_pinout.shtml

i know this buddy..
see my following video..

http://www.youtube.com/watch?v=UnLSULlZ8ys

11
Hacking and Security / Re: How to Edit .Exe file in Windows or Linux also??
« on: May 15, 2012, 09:13:08 am »
Quote from: techb on May 15, 2012, 08:55:59 am

No.




ok...

12
Hardware / Re: Wifi Antenna
« on: May 15, 2012, 09:11:39 am »
Quote from: techb on May 15, 2012, 08:53:28 am

Any schematics? For both the antenna  and you dongle/built in. Because Vcc ++/-- and Data ++/-- could mean anything,


so if i connect my antenna wire to Data + or Data - then will it not little bit help to increase my wifi signal??

13
Hacking and Security / Re: How to Edit .Exe file in Windows or Linux also??
« on: May 15, 2012, 08:54:45 am »
Quote from: Factionwars on May 13, 2012, 06:31:37 pm
^ that or ollydbg, gdb


any other??

14
Hacking and Security / Re: How to Edit .Exe file in Windows or Linux also??
« on: May 15, 2012, 08:52:38 am »
Quote from: Kulverstukas on May 13, 2012, 04:16:40 pm
What specifically do you want to edit in an executable?


Some Code (Programming language) .... and also its process

15
Hardware / Wifi Antenna
« on: May 15, 2012, 08:49:53 am »
Hello Guys.. I have Created a Single Wire Wifi antenna at Home. so i want to connect it to my laptop via USB Direct.. so please help me to which wire i should join or connect my antenna?? in USB there are 4 Wires

1, Power +
2, Power -
3, Data +
4, Data -

so please help me...!!!!!

Pages: [1] 2